From: Baruch Even (baruch_at_nonexisting.hamakor.org.il)
Date: Tue 24 Jan 2006 - 17:06:44 IST
I can only suggest to do a binary search on the DOWNLINK variable to see
if and where it starts to affect your connection.
Alex Alexander wrote:
> Ok, thats easy.
>
> Basic topology of my network:
>
> 384/128 ADSL ROUTER --- (ethernet 192.168.1.0/24) --- eth1 : LINUX ROUTER :
> eth0 --- (ethernet 192.168.2.0/24) --- LINKSYS SWITCH
>
> linux box has "ipmasq" package to auto-set-up iptables NAT rules... tried
> Shorewall too with same results.
>
> routemaster:~/wondershaper# ifconfig:
>
> eth0 Link encap:Ethernet HWaddr 00:50:FC:84:56:9D
> inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
> inet6 addr: fe80::250:fcff:fe84:569d/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:1284781 errors:0 dropped:0 overruns:0 frame:0
> TX packets:2049060 errors:0 dropped:0 overruns:2 carrier:0
> collisions:0 txqueuelen:30
> RX bytes:179793611 (171.4 MiB) TX bytes:1413927320 (1.3 GiB)
> Interrupt:11 Base address:0xa400
>
> eth1 Link encap:Ethernet HWaddr 00:80:48:E6:F9:F8
> inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
> inet6 addr: fe80::280:48ff:fee6:f9f8/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:2315790 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1706335 errors:0 dropped:0 overruns:0 carrier:0
> collisions:890 txqueuelen:1000
> RX bytes:1149945401 (1.0 GiB) TX bytes:358042555 (341.4 MiB)
> Interrupt:5 Base address:0xa000
>
>
> routemaster:~/wondershaper# ./wshaper.htb status
>
> qdisc pfifo_fast 0: bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
> Sent 14965880 bytes 110452 pkts (dropped 0, overlimits 0)
>
>
> routemaster:~/wondershaper# head wshaper.htb
> (...)
> DOWNLINK=350
> UPLINK=96
> DEV=eth1
[...]
> Next I tried to lower the values in wshaper.htb...
>
> DOWNLINK=300
> UPLINK=80
=================================================================
To unsubscribe, send mail to linux-il-request_at_linux.org.il with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail linux-il-request_at_linux.org.il
This archive was generated by hypermail 2.1.7 : Tue 24 Jan 2006 - 17:19:39 IST